研究者学術情報データベース

タグチ　コウゾウ
田口　耕造
TAGUCHI Kozo

所属理工学部電気電子工学科

職名教授

学会発表
1.	2022/08/24	Proposal of a block-shaped rice husk-bokuju cathode with added copper in a floating microbial fuel cell (The 5th International Conference on Renewable Energy and Environment Engineering (REEE 2022))
2.	2022/06/05	Effectiveness of light scattering layer with MP-SiO2@TiO2 core-shell and its ozone treatment in dye-sensitized solar cells (20th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2022))
3.	2022/06/05	Fabrication of dye-sensitized solar cells using anatase TiO2 prepared by hydrothermal synthesis and UV-ozone treatment (20th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2022))
4.	2022/06/05	Improving the output of soil microbial fuel cells with UV ozone-treated buckypaper anodes (20th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2022))
5.	2022/06/05	Investigation of rutile and anatase mesoporous SiO2@TiO2 core-shell in the scattering layer of dye-sensitized solar cells and the effectiveness of ozone treatment (20th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2022))
6.	2022/06/05	Soil microbial fuel cells with the low-cost anode made of rice husk charcoal and Japanese drawing ink “Bokuju” (20th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2022))
7.	2022/03/23	Photocatalytic performance test of Sn3O4/TiO2/SiO2 particles with adjusted Sn3O4 deposition under indoor environment (7th International Conference on Nanotechnology and Nanomaterials in Energy (ICNNE 2022))
8.	2022/01/07	Anti-bacterial test of Sn3O4/TiO2/SiO2 particles with controlled Sn3O4 deposition (8th International Conference on Environment and Bio-Engineering (ICEBE 2022))
9.	2021/09/10	A biodegradable water-activated battery: using an activated carbon-based anode and a CNT-based air-cathode (The 7th International Conference on Renewable Energy and Development (ICRED 2021))
10.	2021/09/10	Improving the Performance of Baker’s Yeast-powered MFCs by Adding Dehydrogenase Enzymes to Oxidize Yeast-produced Ethanol (The 7th International Conference on Renewable Energy and Development (ICRED 2021))
11.	2021/08/30	A portable soil microbial fuel cell for sensing soil water content (XXIII IMEKO World Congress)
12.	2021/06/10	A Simple Energy Harvesting Device for Indoor Environment Based on Sn3O4 Photoanode (The 3rd Euro-Mediterranean Conference for Environmental Integration (EMCEI-2021))
13.	2021/06/10	Effectiveness of PDDA in stainless steel mesh-based counter electrode in DSSC (The 3rd Euro-Mediterranean Conference for Environmental Integration (EMCEI-2021))
14.	2021/06/10	Effectiveness of rice husk activated carbon and case type in microbial fuel cells (The 3rd Euro-Mediterranean Conference for Environmental Integration (EMCEI-2021))
15.	2021/06/10	Rice husk activated carbon for fabricating the electrodes of microbial fuel cell: an examination of the effectiveness of PTFE binder (The 3rd Euro-Mediterranean Conference for Environmental Integration (EMCEI-2021))
16.	2021/06/10	Soil microbial fuel cells using Co-MnO2/C as an effective air-cathode catalyst (The 3rd Euro-Mediterranean Conference for Environmental Integration (EMCEI-2021))
17.	2019/12	Anodized Stainless Mesh for Flexible Battery Anodes (The International Conference on Sustainable Energy and Green Technology 2019)
18.	2019/12	Microbial Fuel Cells with Yeast Biofilm Anode and Buckypaper Cathode (The International Conference on Sustainable Energy and Green Technology 2019)
19.	2019/09	Effect of doping zinc to aluminum on the aluminum-air battery performance (The 19th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2019))
20.	2019/09	Enhancing the power generation of Rhodopseudomonas palustris-based MFC (The 19th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2019))
21.	2019/09	Fabrication and evaluation of Ni-based air-cathode (The 19th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2019))
22.	2019/09	Simple manufacturing method of Buckypaper for effective air-cathode (The 19th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2019))
23.	2019/06	A biodegradable water-activated battery based on an activated carbon anode and a CNT air-cathode (Seventh European Conference on Renewable Energy Systems (ECRES2019))
24.	2019/06	A simple method for etching and doping zinc to aluminum anodes for high performance aluminum air batteries (Seventh European Conference on Renewable Energy Systems (ECRES2019))
25.	2019/06	CNT coating on surface-processed aluminum anodes for high-performance aluminum air batteries (Seventh European Conference on Renewable Energy Systems (ECRES2019))
26.	2019/06	Enhancing DSSC photoanode performance by using handmade Ni-doped TiO2 to fabricate scattering layers (Seventh European Conference on Renewable Energy Systems (ECRES2019))
27.	2019/06	Enhancing the performance of E. coli-powered MFCs by using porous 3D anodes based on coconut activated carbon (Seventh European Conference on Renewable Energy Systems (ECRES2019))
28.	2019/06	Flexible dye-sensitized-solar-cells for indoor energy harvesting (Seventh European Conference on Renewable Energy Systems (ECRES2019))
29.	2019/06	Improving the performance of yeast-powered MFCs by adding dehydrogenase enzymes to oxidize yeast-produced ethanol (Seventh European Conference on Renewable Energy Systems (ECRES2019))
30.	2019/06	Study of activated carbon sheets used for air-cathodes of portable quasi-solid aluminum air batteries (Seventh European Conference on Renewable Energy Systems (ECRES2019))
31.	2019/06	The development of a flexible battery by using a stainless mesh anode (Seventh European Conference on Renewable Energy Systems (ECRES2019))
32.	2019/03	A disposable, on-demand, paper-based microbial fuel cell (The International Conference on Small Science)
33.	2018/12/06	Effect of diatomaceous earth on thermoelectric elements using multi-walled carbon nanotubes (4th International Postgraduate Conference on Industrial Engineering and Engineering Management(IPCIEEM 2018))
34.	2018/12/06	Evaluation of cathode electrode performance in microbial fuel cell by cyclic voltammetry (4th International Postgraduate Conference on Industrial Engineering and Engineering Management(IPCIEEM 2018))
35.	2018/12/06	Performance of a chamber-less microbial fuel cell with a paper-based membrane coated by Vaseline (4th International Postgraduate Conference on Industrial Engineering and Engineering Management(IPCIEEM 2018))
36.	2018/11/06	Effect of ΔiscS deficiency on current generation of E. coli in Microbial Fuel Cells (4th International Conference on Engineering, Science and Technology(ICEST 2018))
37.	2018/11/06	High Performance Activated Carbon Paper-Based electrode for Microbial Fuel Cells (4th International Conference on Engineering, Science and Technology(ICEST 2018))
38.	2018/11/06	Improving photocatalytic decomposition by MWCNT and anodized α-Fe2 O3 composite (4th International Conference on Engineering, Science and Technology(ICEST 2018))
39.	2018/07/24	A Paper-Based Bio Fuel Cell Generating Power from the Biofilm of Bacillus Subtilis Bacteria (The Asia-Pacific Symposium on Applied Electromagnetics and Mechanics (APSAEM 2018))
40.	2018/07/24	Microbial Fuel Cells Using Purple Photosynthetic Bacteria With Dry-Surface Biofilms (The Asia-Pacific Symposium on Applied Electromagnetics and Mechanics (APSAEM 2018))
41.	2018/07/24	Performance Improvement of DSSC by Plasma Treatment of Photoanode (The Asia-Pacific Symposium on Applied Electromagnetics and Mechanics (APSAEM 2018))
42.	2018/07/24	Simplification of aluminum air battery by gelation electrolyte and investigation of material for cathode electrode (The Asia-Pacific Symposium on Applied Electromagnetics and Mechanics (APSAEM 2018))
43.	2018/07/24	The Plasma Surface Treatment of TiO2 Layer for Efficiency Enhancement in Dye Sensitized Solar Cells (The Asia-Pacific Symposium on Applied Electromagnetics and Mechanics (APSAEM 2018))
44.	2018/01/27	Influence of drying temperature on the quality of TiO2 multilayer film in dye-sensitized solar cells (4th International Conference on Engineering Technology and Management (ICETM 2018))
45.	2018/01/27	Performance improvement of microbial fuel cell based on biofilm-loaded carbon nanotube sheet electrode (4th International Conference on Engineering Technology and Management (ICETM 2018))
46.	2018/01/27	The Improvement of Visible-light-response of TiO2 Photocatalyst Produced by Changing the Baking Steps with Additional Nitrogen Source and Iron Source
47.	2018/01/27	The relationship between multiwall carbon nanotube and polyethyleneimine in thermoelectric
48.	2018/01/24	Optimum Conditions for Titanium Oxide Thin Film on Dye-Sensitized Solar Cells Using Organic Dye Sensitizer-MK2 (International Conference on Agriculture, Food and Biotechnology (ICAFB 2018))
49.	2018/01/24	The Impact of PDDA in CNT Counter Electrode on the Conversion Efficiency of DSSC (International Conference on Agriculture, Food and Biotechnology (ICAFB 2018))
50.	2018/01/24	Thick Activated Carbon Sheet Electrode and Hydrophobic Organic Matter Improve the Performance of Microbial Fuel Cell (International Conference on Agriculture, Food and Biotechnology (ICAFB 2018))
51.	2012/11	Experimental and Theoretical Investigation of Common Path Optical Coherence Tomography Using Conical Tip Lens Fiber (Asia-Pacific Interdisciplinary Research Conference 2012 (AP-IRC 2012))
52.	2012/11	Influences of the inserted angle of an optical fiber for an optical trapping (The 14th International Conference on Precision Enginerring(ICPE2012))
53.	2012/11	Investigation on Dynamic Chemical Etching of Fiber Probe for Cell Isolation (The 14th International Conference on Precision Enginerring(ICPE2012))
54.	2012/11	Theoretical Investigation of an Optical Vibration Using Laser Beams from Optical Fibers Inserted at an Angle of 35 degrees (The 14th International Conference on Precision Enginerring(ICPE2012))
55.	2012/11	Three Dimensional Optical Trapping of Micro Object Using Plural Optical Fiber Axicon Microlens (Asia-Pacific Interdisciplinary Research Conference 2012 (AP-IRC 2012))
56.	2012/11	Two-Dimensional Cell Trapping Using Single Axicon Fiber without Physical Contact (The 14th International Conference on Precision Enginerring(ICPE2012))
57.	2012/09	Common-path Optical Coherence Tomography (CPOCT) Using Axicon Fiber: A Comparison of Experiments and Theory (38th International Micro & Nano Engineering Conference (MNE 2012))
58.	2012/09	Conical Fiber Probe for Single Cell Isolation Using Microfluidic Device (38th International Micro & Nano Engineering Conference (MNE 2012))
59.	2012/09	Experimental and Theoretical Investigation on Dynamic Chemical Etching of Fiber Probe for Cell Trapping and Isolation (38th International Micro & Nano Engineering Conference (MNE 2012))
60.	2012/01	Cell manipulation and isolation using dynamically etched fiber tip (SPIE Photonics West 2012)
61.	2012/01	Chemically etched axicon fiber for cell trapping without physical contact (SPIE Photonics West 2012)
62.	2011/11	Chemically Etched Single Mode Fiber Tip for High Lateral Resolution Imaging in Optical Coherence Tomography (4th International Conference of Asian Society for Precision Engineering and Nanotechnology(ASPEN 2011))
63.	2011/11	Laser Trapping Using a Fiber Axicon Microlens (4th International Conference of Asian Society for Precision Engineering and Nanotechnology(ASPEN 2011))
64.	2011/11	Observation of Biological Tissues Using Common Path Optical Coherence Tomography with Gold Coated Conical Tip Lens Fiber (Asia-Pacific Interdisciplinary Research Conference 2011 (AP-IRC 2011))
65.	2011/11	Optical manipulation of symbiotic chlorella in paramecium bursaria using a fiber axicon microlens (Asia-Pacific Interdisciplinary Research Conference 2011 (AP-IRC 2011))
66.	2011/11	Theoretical Study of optical Vibration and Circulation of a Microsphere (4th International Conference of Asian Society for Precision Engineering and Nanotechnology(ASPEN 2011))
67.	2011/11	Three-Dimensional Optical Trapping for Cell Isolation Using Tapered Fiber Probe by Dynamic Chemical Etching (Asia-Pacific Interdisciplinary Research Conference 2011 (AP-IRC 2011))
68.	2011/09	Chemically etched conical microlens for manipulating and isolating biological cells without physical contact (37th International Conference on Micro and Nano Engineering (MNE 2011))
69.	2011/09	Common-path Fourier domain optical coherence tomography with a conical-tip fiber (37th International Conference on Micro and Nano Engineering (MNE 2011))
70.	2010/01	The Method to Encourage Biological Cell Division with Vibration and Circulation Technique Using Optical Manipulating (Proc. of The 3rd International Conference on the Development of Biomedical Engineering in Vietnam)
71.	2009/03	Laser-assisted cell transfection using novel laser beam geometries (Green Lighting Event 2009)
72.	2009/01	An Employment of Projective Space on Image Processing Measurement (Symposium on Disaster Prevention and Information Systems)
73.	2008/09	Fs cellular transfection using novel laser beams (ALT ' 08)
74.	2008/09	Novel studies of femtosecond cellular transfection (Photon 2008)
75.	2008/05	Femtosecond cellular transfection using novel laser beams (Biophotonics Workshop)
76.	2008/05	Novel studies of cellular transfection using femtosecond laser pulses (Biophotonics Workshop)
77.	2007/09	A Study of Dual-Beam Fiber Optic Trap (ISEM2007)
78.	2007/09	Investigation on the Radius of Hemispherical Microlens of Optical Fiber End for Single-Beam Optical Fiber Trap (ISEM2007)
79.	2007/09	Proposal of Micro-Particle Vibration Using Optical Trapping (ISEM2007)
80.	2006	Experimental and Theoretical Investigation of an Optical Levitation Using Dual-Beam from Optical Fibers Inserted at an Angle (ICN&T2006)
81.	2006	Optically Vibrated Manipulation Technique of a Microsphere in a Liquid Using Plural Optical Fibers (ICN&T2006)
82.	2006	Single-beam optical fiber trap (ICN&T2006)
83.	2005	An Employment of Projective Space on Image Processing Measurement (Proc of JOINT IMEKO TC1 and TC7 Symposium)
84.	2005	EXPERIMENTAL INVESTIGATION ON THE OPTICALLY VIBRATED MANIPULATION OF A BIOLOGICAL OBJECT USING OPTICAL FIBERS (ICBME2005)
85.	2005	Levitation of a Biological Object in Liquid Using Plural Optical Fibers (ICBME2005)
86.	2005	Optical Fiber Trap –Application to Biological Cell- (Proc. of The 12th International Conference on Biomedical Engineering(ICBME2005))
87.	2005	Optical Manipulation of a Micro Biological Object Using Optical Fibers and Optical Switch (International Symposium on Interdisciplinary Electromagnetic, Mechanic & Biomedical Problems(ISEM2005))
88.	2005	Optical Rotational Manipulation System of a Biological Object Using Plural Optical Fibers and Optical Switch (Proc. of 12th International Symposium on Interdisciplinary Electromagnetic, Mechanic & Biomedical Problems(ISEM2005))
89.	2005	OPTICAL ROTATIONAL MANIPULATION SYSTEM USING PLURAL OPTICAL FIBERS AND OPTICAL SWITCH (Proc. of 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE2005))
90.	2005	OPTICALLY VIBRATED MANIPULATION OF A MICRO OBJECT USING OPTICAL FIBERS (Proc. of 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE2005))
91.	2005	PROPOSAL OF AN OPTICAL ROTATIONAL MANIPULATION TECHNIQUE OF A BIOLOGICAL OBJECT USING PLURAL OPTICAL FIBERS AND OPTICAL SWITCH (ICBME2005)
92.	2004	A NOVEL FIBER-BASED OPTICAL ROTATIONAL MANIPULATION METHOD OF A MICRO OBJECT BY MEASURING THE LASER POWER REFLECTED AT THE SURFACE OF AN ELLIPTICALLY SHAPED OBJECT (Proc. of VIII International Conference on Optics Within Life Sciences - OWLS8 2004)
93.	2004	An Image Processing Measurement on Spatial Frequency Domain (Proc of 10th IMEKO TC7 Symposium)
94.	2003	Fiber-based Optical Manipulation System (MOC2003)
95.	2001/07	Numerical Computations of the Influence of Fiber Insertion Angle on Single-Beam Fiber Optic Trap (CLEO/PR2001)
96.	2001/07	Proposal of Optical Fiber Trapping in Space (OECC/IOOC 2001)
97.	2001/07	Theoretical Investigation of Dual-Beam Fiber Optic Trapping Method in Cosmic Space (CLEO/PR2001)
98.	2000/11	Investigation on the radius of hemispherical microlens for single- beam fiber optic trap (ODF2000)
99.	2000/11	Optical forces in a multiple-beam trap using tapered hemispherically lensed optical fibers (pp.85-88)
100.	2000/09	A Study of Optical Rotational Manipulation of an Elliptically Shaped Biological Object (CLEO2000)
101.	2000/09	Chemically Assisted Nitrogen Ion Beam Etching of Polymeric Optical Waveguide (CLEO2000)
102.	2000/09	Numerical analysis for single-beam fiber optic trap (CLEO2000)
103.	2000/09	Three Dimensional Optical Trapping Using Plural Optical Fibers (CLEO2000)
104.	2000/07	A Study of Two Dimensional Optical Fiber Trapping (OECC2000)
105.	1999/10	Biological applications of fiber optic trap (MICRO/MEMS'99)
106.	1999/10	Experimental and theoretical study of the single-beam optical fiber trap (MICRO/MEMS'99)
107.	1999/06	Generation of Self-Q-switched Optical pulses from a Semiconductor Ring Laser (XIV IMEKO WORLD CONGRESS)
108.	1999/06	Measurement of Fundamental Characteristics of a Semiconductor Ring Laser as an Optical Rotation Sensor (XIV IMEKO WORLD CONGRESS)
109.	1999/06	Optical Tweezers Technology for Biological Cells Using Tapered Hemispherically Lensed Optical Fibers (XIV IMEKO WORLD CONGRESS)
110.	1998/12	Experimental Analysis of Optical Trapping Using Tapered Hemispherically Lensed Optical Fiber (nfo-5)
111.	1998/09	Manipulation of a Microscopic Object Using Plural Optical Fibers (CLEO/Europe'98)
112.	1998/09	Self-pulsation in a Semiconductor Ring Laser (CLEO/Europe'98)
113.	1998/09	Semiconductor Ring Laser Gyroscopes (CLEO/Europe'98)
114.	1998/07	Optical manipulation and observation of nonlinear phenomenon from optically trapped microscopic object using optical fibers (OECC’98)
115.	1997	Length Measurement on Frequency Domain of Video (Proc. of XIV IMEKO WORLD CONGRESS)
116.	1994/09	Width Measurement Using Video Signal (Proc. of XIII IMEKO WORLD CONGRESS)
117.	1993	Automobile Speed Measurement on TV Picture (Proc. of IMEKO TC1 AND TC7 Colloquium)