Researcher Database

YAMASUE EIJI

Department / Course College of Science and Engineering Department of Mechanical Engineering

Title / Position Professor

Papers
1.	2023/05/25	Recycling or chemical stabilization? Greenhouse gas emissions from treatment of waste containing mercury under the Minamata Convention │ (Co-authored)
2.	2023/03/15	Lead-acid batteries (LABs) and the thermogravimetric analysis of Pb metal reduction from PbO via microwave heating at 2.45 GHz │ Cleaner Technology and Environment │ 13,pp.100619 (Co-authored)
3.	2023/01/01	Mercury Mitigation in Artisanal and Small-scale Gold Mining: Cyanide Emissions and the Need for Retorted Mercury Management as Unintended consequences │ Resources, Conservation and Recycling │ 188,pp.106708 (Co-authored)
4.	2022/06/25	Global resource circularity of lithium-ion battery to 2050: traction and stationary use │ Mining │ (Co-authored)
5.	2022/06/17	Distributed recycling system with microwave-based heating for obsolete alkaline batteries │ Resources, Environment and Sustainability │ (Co-authored)
6.	2022/06/08	Life cycle resource use of nuclear power generation considering total material requirement │ Journal of Cleaner Production │ ,pp.132530 (Co-authored)
7.	2022/05/12	The paradox behind green innovations │ Waste Management & Research: The Journal for a Sustainable Circular Economy │ (Co-authored)
8.	2022/05/10	Estimation of greenhouse gas emissions of petrol, biodiesel and battery electric vehicles in Malaysia based on life cycle approach │ Sustainability │ 14 (10),pp.5783 (Co-authored)
9.	2022/03/01	Multi-regional land disturbances induced by mineral use in a product-based approach: A case study of gasoline, hybrid, battery electric and fuel cell vehicle production in Japan │ Resources, Conservation and Recycling │ 178,pp.1060093 (Co-authored)
10.	2022/02/18	International comparison of impurities mixing and accumulation in steel scrap │ Journal of Industrial Ecology │ 26,pp.1040-1050 (Co-authored)
11.	2021/12/05	Microwave-based Extractive Metallurgy to Obtain Pure Metals: A Review │ Cleaner Engineering and Technology │ 5,pp.100306 (Co-authored)
12.	2021/10/01	Estimating material flows of two-wheelers in Cambodia imported from Asian countries as used products │ Global Environmental Research │ 25 (1-2),pp.85-92 (Co-authored)
13.	2021/05/29	Benefits of a regional co-processing scheme: the case of steel/iron and cement industries in Vietnam, Laos, and Cambodia │ Journal of Cleaner Production │ (Co-authored)
14.	2021/04/23	Estimating the generation of recycled metals from obsolete motorcycles in Vietnam for ELV management │ Journal of Material Cycles and Waste Management │ (Co-authored)
15.	2021/04/19	Microwave-based approach to recovering zinc from electric arc furnace dust using silicon powder as a non-carbonaceous reductant │ The Journal of The Minerals, Metals & Materials Society (JOM) │ (Co-authored)
16.	2021/03	Evaluation of resource use in the household lighting sector in Malaysia considering land disturbances through mining activities │ Resources, Conservation and Recycling │ 166,pp.105343 (Co-authored)
17.	2021/03	Natural resource use of gasoline, hybrid, electric and fuel cell vehicles considering land disturbances │ Resources, Conservation and Recycling │ 166,pp.105256 (Co-authored)
18.	2021/02/11	Evaluating influences of impurities on hydrogen production in Si-water reaction │ International Journal of Hydrogen Energy │ 46 (11),pp.7722-7732 (Co-authored)
19.	2021/01/20	Natural resource use of a traction lithium-ion battery production based on land disturbances through mining activities │ Journal of Cleaner Production │ 280 (2),pp.124781 (Co-authored)
20.	2020/12	Ecological Footprint and Total Material Requirement as Environmental Indicators of Mining Activities: Case studies of copper mines │ Environmental and Sustainability Indicators │ 8,pp.100082 (Co-authored)
21.	2020/04	Applicability of Wiedemann-Franz Law to Thermal Conductivity of Molten Field’s Metal │ Materials Science Forum │ 985,pp.1-9 (Co-authored)
22.	2020/04	Chronological transition of relationship between intracity transport lifecycle energy efficiency and population density │ Energies │ 13 (8) (Co-authored)
23.	2020/03	Estimation of WEEE Generated and Metal Discarded in Vietnam Considering Lifespan Transition │ Resources, Conservation & Recycling │ ,pp.104621 (Co-authored)
24.	2019	An optimum treatment for waste electronic home appliance in remote area: the case of Kinmen, Taiwan │ Waste Management │ 89,pp.379-385 (Co-authored)
25.	2019	Anthropogenic Disturbance by Domestic Extraction of Gold Mining in Mongolia │ Journal of Japan Society of Civil Engineers, Ser. G (Environmental Research) │ 75 (6),pp.285-290 (Co-authored)
26.	2019	Global warming potential and total material requirement in metalproduction: Identication of changes in environmental impact throughmetal substitution │ Science of the Total Environment │ 651,pp.1764-1755
27.	2019	Recommendation to ASEAN nuclear development based on lessons learnt from the Fukushima nuclear accident │ Energy Policy │ 129,pp.628-635 (Co-authored)
28.	2019	Structure and Catalytic Behavior of CuO-CeO2 prepared by High-Energy Ball Milling │ Royal Society Open Science │ 6 (Co-authored)
29.	2019	Total Material Requirement for the Global Energy Transition to 2050: A focus on transport and electricity │ Resources, Conservation & Recycling │ 148,pp.91-103 (Co-authored)
30.	2019	Waste shipments for energy recovery as a waste treatment strategy for small islands: the case of Kinmen, Taiwan │ Journal of Material Cycles and Waste Management │ 21 (1),pp.44-56 (Co-authored)
31.	2018	Comprehensive Analysis of External Dependency in terms of Material Criticality by Employing Total Material Requirement: Sulfuric Acid Production in Japan as a case study │ Minerals │ 8 (3),pp.114 (Co-authored)
32.	2018	Cost-Security Analysis Dedicated for The Off-grid Electricity System │ Renewable Energy │ (115),pp.871-879 (Co-authored)
33.	2018	Crystal Structures and Electronic Band Structures for Hypothetic Lithium Boron Nitride Intercalation Compounds │ Journal of Alloy and Compounds │ 751,pp.324-334 (Co-authored)
34.	2018	Data Envelopment Analysis for steel production with the use of Total Material Requirement │ Matériaux et Techniques │ (Co-authored)
35.	2018	Evaluating Power Reliability Dedicated for Sudden Disruptions: Its Application to Determine Capacity on the Basis of Energy Security │ Sustainability │ 10 (6),pp.2059- (Co-authored)
36.	2018	Recycling of End-of-Life Vehicles in Small Islands: The Case of Kinmen, Taiwan │ Sustainability │ 10 (4377),pp.1-14 (Co-authored)
37.	2018	Vehicle Energy Efficiency Evaluation from Well-to Wheel Lifecycle Perspective │ Transportation Research Part D: Transport and Environment │ 65,pp.355-367 (Co-authored)
38.	2017	Comparative analysis of average time of use of home appliances │ Procedia CIRP │ 61,pp.657-662 (Co-authored)
39.	2017	Electrochemical lithium Intercalation behavior of pristine and milled hexagonal boron nitride │ Journal of Electroanalytical Chemistry │ 799,pp.263-269 (Co-authored)
40.	2017	Intercalation of hexagonal boron nitride and graphite with lithium by sequential process of ball milling and heat treatment │ Journal of Alloys and Compounds │ 707,pp.172-177 (Co-authored)
41.	2017	Investigating energy literacy and its structural model for lower secondary students in Japan │ International Journal of Environmental & Science Education (IJESE) │ 12 (5),pp.1067-1095 (Co-authored)
42.	2017	Lifetime Analysis for Electronic Devices in Vietnam │ Procedia CIRP │ 61,pp.152-154 (Co-authored)
43.	2017	Material flows from Electronic Waste: Understanding the shortages for Extended Producer Responsibility Implementation in Vietnam │ Procedia CIRP │ 61,pp.651-656 (Co-authored)
44.	2017	New Photocatalyst LnOCl (Ln= Sm, Nd) and Novel Cocatalytic effect on BiOCl in Humid Environment │ ChemComm │ 53,pp.8854-8857 (Co-authored)
45.	2017	Quantifying the total amounts of tramp elements associated with carbon steel production in Japan │ ISIJ International │ 57 (2),pp.388-393 (Co-authored)
46.	2016	Consuming Childhoods: An Assessment of Child Labor’s Role in Indian Production and Global Consumption │ Journal of Industrial Ecology │ 20 (3),pp.611-622 (Co-authored)
47.	2016	Critical minerals and energy – impacts and limitations of moving to unconventional resources │ Resources │ 5 (2),pp.19-50 (Co-authored)
48.	2016	Electrical Stability of Al-doped ZnO Transparent Electrode prepared by Sol-Gel Method │ Applied Surface Science │ 377,pp.355-360 (Co-authored)
49.	2016	Innovations in Steelmaking Technology and Hidden Phosphorus Flows │ Science of the Total Environment │ 542,pp.1162-1168 (Co-authored)
50.	2016	Structures of Boron Nitride Intercalation Compound with Lithium synthesized by Mechanical Milling and Heat Treatment │ Journal of Alloys and Compounds │ 685,pp.135-141 (Co-authored)
51.	2016	Total Material Requirement of Scrap Steel from End-of-Life Vehicles │ ISIJ International │ 56 (8),pp.778-787 (Co-authored)
52.	2015	Effect of substrate roughness and working pressure on photocatalyst of N-doped TiOx films prepared by reactive sputtering with air │ Applied Surface Science │ 324,pp.339-348 (Co-authored)
53.	2015	Magnetic Field Effect on Heterogeneous Photocatalysis │ Catalysis Today │ 258 (P2),pp.634-647 (Co-authored)
54.	2015	Sol-gel and RF sputtered AZO thin films: Analysis of Oxidation Kinetics in Harsh Environment │ Journal of Materials Science: Materials in Electronics (JMSE) │ 25,pp.4883-4888 (Co-authored)
55.	2015	The Labour Footprint – An input-output approach to evaluate labour-related issues │ Economic Systems Research │ 27 (4),pp.415-439 (Co-authored)
56.	2015	Weight at Source for Phosphorous Fertilizer Production │ Global Environmental Research │ 19 (11),pp.97-104 (Co-authored)
57.	2014	Adhesion Properties of milled CuO-CeO2/α-Al2O3 on Metallic Substrate for Automotive Catalytic Converter │ Particulate Science and Technology │ 32 (5),pp.529-536 (Co-authored)
58.	2014	Assessment of metal recovery efficiency for waste printed circuit boards in Vietnam with MEMRECS and different end-of-life scenarios │ Journal of Solid Waste Technology and Management │ 40 (2),pp.100-116 (Co-authored)
59.	2014	Damp heat stability of AZO transparent electrode and influence of thin metal film for enhancing the stability │ Journal of Materials Science: Materials in Electronics │ 25,pp.3203-3208 (Co-authored)
60.	2014	Effect of process control agents (PCAs) on mechanochemical processes and contamination science │ Materials Science Forum │ 787-786,pp.2665-2670 (Co-authored)
61.	2014	Energy Service Satisfaction in two Mexican Communities: a study on demographic, household, equipment and energy related predictors │ Energy policy │ 73,pp.110-126 (Co-authored)
62.	2014	Improving sustainable recovery of metals from waste printed circuit boards by the primary copper smelter process │ Journal of Material Cycles and Waste Management │ 16 (2),pp.298-305 (Co-authored)
63.	2014	Metallurgical Evaluation of Farmer’s Steelmaking in Finland │ ISIJ International │ 54 (5),pp.1024-1029 (Co-authored)
64.	2014	Sustainable Materials Management on the basis of Relationship between Materials’ Properties and Human Needs │ Matériaux & Techniques │ 112 (5),pp.506-510 (Co-authored)
65.	2013	Direct Determination of Standard Gibbs Energies of the Formation of 4CaO•P2O5 and 3CaO•P2O5 by Transpiration Method │ ISIJ International │ 53 (10),pp.1833-1840 (Co-authored)
66.	2013	MEMRECS—A Sustainable View for Metal Recycling from Waste Printed Circuit Boards │ Journal of Environmental Protection │ 4 (8),pp.803-810 (Co-authored)
67.	2013	Model for Evaluating Metal Recovery Efficiency of Complex Scraps (MEMRECS) - A Promising Measure for Calculation of Metal Recyclability │ International Journal of Arts & Sciences │ 6 (1),pp.73-87 (Co-authored)
68.	2013	Phase Stability of β-MoSi2-x Prepared by the Na Flux Method against Thermal, Oxidative and Mechanical Treatments │ Journal of Materials Science │ 48 (8),pp.3121-3127 (Co-authored)
69.	2013	Quality Evaluation of Scrap Materials from Urban Buildings by means of Total Materials Requirement │ Journal of Industrial Ecology │ 17 (4),pp.555-565 (Co-authored)
70.	2013	Road transport externalities in Mexico: Estimates and international comparisons │ Transport policy │ 30,pp.63-76 (Co-authored)
71.	2013	Using Total Material Requirement to Evaluate the Potential for Recyclability of Phosphorous in Steelmaking Dephosphorization Slag │ J. Industrial Ecology │ 17 (5),pp.722-730 (Co-authored)
72.	2012	Effect of Static Magnetic Field on Photocatalytic Degradation of Methylene Blue over ZnO and TiO2 Powders │ Applied Magnetic Resonance │ 42,pp.17-28 (Co-authored)
73.	2012	Milling Induced Polymorphic Transformation in MoSi2 │ International Journal of Materials Research (formerly: Zeitschrift fuer Metallkunde) │ 103,pp.1130-1136 (Co-authored)
74.	2012	Molecular Dynamics Study of the Milling-Induced Allotropic Transformation in Cobalt │ Philosophical Magazine │ 92,pp.2117-2129 (Co-authored)
75.	2012	Technical Impact Indicators for Materials │ Revue de Métallurgie │ 109,pp.305-321 (Co-authored)
76.	2011	Dynamic Equilibrium of MoSi2 Polymorphs during Mechanical Milling │ J. Alloys and Compounds │ 509 (1),pp.S243-S246 (Co-authored)
77.	2011	Effects of Magnetic Field on Photodegradation of Methylene Blue over ZnO and TiO2 Powders using UV-LED as a Light Source │ J. Chem. Chem. Eng │ 5,pp.729-737 (Co-authored)
78.	2011	Magnetic field effects on photodecomposition of methylene blue over ZnO particles │ RSC Advances, The Royal Society of Chemistry │ 1,pp.1060-1063 (Co-authored)
79.	2011	Regional Development or Resource Preservation? A Perspective from Japanese Appliance Exports │ Ecological Economics │ 70,pp.788-797 (Co-authored)
80.	2011	The environmental LCA of steel vs HDPE car fuel tanks with varied pollution control │ International Journal of Life Cycle Assessment │ 16,pp.410-419 (Co-authored)
81.	2010	Hybrid LCA of a DfD technology: Active Disassembling Fasteners using Hydrogen Storing Materials implemented to Home Electric Appliances │ Environmental Science & Technology │ 44,pp.4402-4408 (Co-authored)
82.	2010	Investigations on the Nitrogen Storage Property of LaNi5 powder │ J. Alloys and Compounds │ ,pp.4375-4580 (Co-authored)
83.	2010	Photocatalysis and surface doping states of N-doped TiOx filmsg prepared by reactive sputtering with dry air │ Applied Catalysis B: Environmental │ 93 (3-4),pp.217-226 (Co-authored)
84.	2010	Revisiting Carbon Based Metallic Compounds – Nanoscale Surface Science and Environmental Catalysis │ Materials Science Forum │ 638-642,pp.858-863 (Co-authored)
85.	2010	Special Issue on Growth of Ecomaterials as a Key to Eco-Society IV (PREFACE) │ Materials Transactions │ 51 (5) (Co-authored)
86.	2010	Traditional Steelmaking in Southwestern Ethiopia: A Metallurgical Analysis │ Nile Ethiopian Studies │ 14,pp.1-18 (Co-authored)
87.	2009	Effect of oxygen and nitrogen concentration of nitrogen doped TiOx film as photocatalyst prepared by reactive sputtering │ Applied Catalysis A: General │ 371 (1--2),pp.179-190 (Co-authored)
88.	2009	Evaluation of Total Materials Requirement for the Recycling of Elements and Materials (Urban Ore TMR) from End-of-Life Electric Home Appliances │ Materials Transactions │ 50 (9),pp.2165-2172 (Co-authored)
89.	2009	Novel Evaluation Method of Elemental Recyclability from Urban Mine, ~Concept of Urban-ore TMR ~ │ Materials Transactions │ 50 (6),pp.1536-1540 (Co-authored)
90.	2009	Phase stability under high-energy ball milling in the Ti-O system │ Journal of Physics: Conference Series │ 144,pp.12-21 (Co-authored)
91.	2009	Preparation of N-doped TiOx films as photocatalyst using reactive sputtering with dry air │ Materials Transactions │ 50 (8),pp.1805-1811 (Co-authored)
92.	2009	Use and disposal of large home electronic appliances in Vietnam │ Journal of Material Cycles and Waste Management │ 11,pp.358-366 (Co-authored)
93.	2008	Evaluation of Recycling System for Electronic Appliances in Vietnam │ Development Engineering │ 14,pp.1-13 (Co-authored)
94.	2008	Formation of supersaturated Fe-Li solid solution by mechanical alloying │ Reviews on Advanced Materials Science │ 18,pp.284-288 (Co-authored)
95.	2007	Carbon Dioxide Reduction into Carbon by Mechanically-milled Wustite │ Journal of Materials Science │ 42,pp.5196-9202 (Co-authored)
96.	2007	Decomposition of Carbon Dioxide into Carbon using Mechanically milled Magnetite │ Journal of Alloys and Compounds │ 434-435,pp.803-805 (Co-authored)
97.	2007	Evaluation of the Dissipated Amounts of Rare Metals from WEEE in Japan │ Materials Transaction, JIM │ 48 (9),pp.2353-2357 (Co-authored)
98.	2007	Mechanical Alloying of Lithium-base Systems │ Journal of Alloys and Compounds │ 434-435,pp.542-545 (Co-authored)
99.	2007	Mechanical alloying, nitrogen storage and magnetization of Ca-Co powder │ Materials Science and Engineering A │ 449-451,pp.1123-1126 (Co-authored)
100.	2007	Mechanical milling of Fe-Li and Cu-Li systems and their nitrogen absorption properties │ Materials Science and Engineering A │ 449-451,pp.1067-1070 (Co-authored)
101.	2007	Mechanical Milling of Lithium with Metal Oxide and its Reactivity with Gases │ Materials Science Forum │ 534-536,pp.197-200 (Co-authored)
102.	2005/10	On the origin and stability of the metastabe phase in rapidly solidified Sn-Bi alloy particles embedded in Al matrix │ Acta Materilia │ 53 (17),pp.593-4603 (Co-authored)
103.	2005	Mechanical alloying and nitrogen storage properties of Ca-Fe powder │ Journal of Alloys and Compounds │ 395,pp.159-165 (Co-authored)
104.	2003/05	Deviation from Wiedemann-Franz law for Thermal Conductivity of liquid Tin and Lead at Elevated Temperature │ International Journal of Thermophysics │ 24 (3),pp.713-730 (Co-authored)
105.	2002	Thermal conductivities of Silicon and Germanium in Solid and Liquid States Measured by Non-Stationary Hot Wire Method with Silica Coated Probe │ Journal of Crystal Growth │ 234,pp.121-131 (Co-authored)
106.	1999/08	Non-stationary Hot Wire Method with Silica-Coated Probe for Measuring Thermal Conductivities of Molten Metals │ Metallurgical and Materials Transactions A │ 30,pp.1971-1979 (Co-authored)