研究者学術情報データベース

ヤマスエ　エイジ
山末　英嗣
YAMASUE EIJI

所属理工学部機械工学科

職名教授

論文
1.	2025/03/05	Resource intensity in the Japanese transportation system: Integration of vehicle and infrastructure │ Sustainability │
2.	2024/03/26	Resource Intensity Analysis of Producing 21 Types of Plastic in Terms of Mining Activity │ Sustainability │ 16 (7),2715
3.	2023/12/29	Contradictory relationship between efficiency and renewable energy under breakeven point: Optimal selection of electrical and electronic equipment │ Cleaner Energy Systems │ ,100103
4.	2023/06/14	Global waste management cost for retorted mercury in artisanal and small-scale gold mining │ Journal of Material Cycles and Waste Management │
5.	2023/05/25	Recycling or chemical stabilization? Greenhouse gas emissions from treatment of waste containing mercury under the Minamata Convention │
6.	2023/03/15	Lead-acid batteries (LABs) and the thermogravimetric analysis of Pb metal reduction from PbO via microwave heating at 2.45 GHz │ Cleaner Technology and Environment │ 13,100619
7.	2023/01/01	Mercury Mitigation in Artisanal and Small-scale Gold Mining: Cyanide Emissions and the Need for Retorted Mercury Management as Unintended consequences │ Resources, Conservation and Recycling │ 188,106708
8.	2022/06/25	Global resource circularity of lithium-ion battery to 2050: traction and stationary use │ Mining │
9.	2022/06/17	Distributed recycling system with microwave-based heating for obsolete alkaline batteries │ Resources, Environment and Sustainability │
10.	2022/06/08	Life cycle resource use of nuclear power generation considering total material requirement │ Journal of Cleaner Production │ ,132530
11.	2022/05/12	The paradox behind green innovations │ Waste Management & Research: The Journal for a Sustainable Circular Economy │
12.	2022/05/10	Estimation of greenhouse gas emissions of petrol, biodiesel and battery electric vehicles in Malaysia based on life cycle approach │ Sustainability │ 14 (10),5783
13.	2022/03/01	Multi-regional land disturbances induced by mineral use in a product-based approach: A case study of gasoline, hybrid, battery electric and fuel cell vehicle production in Japan │ Resources, Conservation and Recycling │ 178,1060093
14.	2022/02/18	International comparison of impurities mixing and accumulation in steel scrap │ Journal of Industrial Ecology │ 26,1040-1050頁
15.	2021/12/05	Microwave-based Extractive Metallurgy to Obtain Pure Metals: A Review │ Cleaner Engineering and Technology │ 5,100306
16.	2021/10/01	Estimating material flows of two-wheelers in Cambodia imported from Asian countries as used products │ Global Environmental Research │ 25 (1-2),85-92頁
17.	2021/09/22	Evaluating Transport Energy Efficiency in Domestic Long-Distance Travel: Japan as a case study │ Transportation Research Record │
18.	2021/05/29	Benefits of a regional co-processing scheme: the case of steel/iron and cement industries in Vietnam, Laos, and Cambodia │ Journal of Cleaner Production │
19.	2021/04/23	Estimating the generation of recycled metals from obsolete motorcycles in Vietnam for ELV management │ Journal of Material Cycles and Waste Management │
20.	2021/04/19	Microwave-based approach to recovering zinc from electric arc furnace dust using silicon powder as a non-carbonaceous reductant │ The Journal of The Minerals, Metals & Materials Society (JOM) │
21.	2021/03	Evaluation of resource use in the household lighting sector in Malaysia considering land disturbances through mining activities │ Resources, Conservation and Recycling │ 166,105343
22.	2021/03	Natural resource use of gasoline, hybrid, electric and fuel cell vehicles considering land disturbances │ Resources, Conservation and Recycling │ 166,105256
23.	2021/02/11	Evaluating influences of impurities on hydrogen production in Si-water reaction │ International Journal of Hydrogen Energy │ 46 (11),7722-7732頁
24.	2021/01/20	Natural resource use of a traction lithium-ion battery production based on land disturbances through mining activities │ Journal of Cleaner Production │ 280 (2),124781
25.	2020/12	Ecological Footprint and Total Material Requirement as Environmental Indicators of Mining Activities: Case studies of copper mines │ Environmental and Sustainability Indicators │ 8,100082
26.	2020/04	Applicability of Wiedemann-Franz Law to Thermal Conductivity of Molten Field’s Metal │ Materials Science Forum │ 985,1-9
27.	2020/04	Chronological transition of relationship between intracity transport lifecycle energy efficiency and population density │ Energies │ 13 (8)
28.	2020/03	Estimation of WEEE Generated and Metal Discarded in Vietnam Considering Lifespan Transition │ Resources, Conservation & Recycling │ 154,104621
29.	2019	An optimum treatment for waste electronic home appliance in remote area: the case of Kinmen, Taiwan │ Waste Management │ 89,379-385
30.	2019	Anthropogenic Disturbance by Domestic Extraction of Gold Mining in Mongolia │ Journal of Japan Society of Civil Engineers, Ser. G (Environmental Research) │ 75 (6),285-290
31.	2019	Global warming potential and total material requirement in metalproduction: Identication of changes in environmental impact throughmetal substitution │ 651,1764-1755
32.	2019	Recommendation to ASEAN nuclear development based on lessons learnt from the Fukushima nuclear accident │ Energy Policy │ 129,628-635
33.	2019	Structure and Catalytic Behavior of CuO-CeO2 prepared by High-Energy Ball Milling │ Royal Society Open Science │ 6
34.	2019	Total Material Requirement for the Global Energy Transition to 2050: A focus on transport and electricity │ Resources, Conservation & Recycling │ 148,91-103
35.	2019	Waste shipments for energy recovery as a waste treatment strategy for small islands: the case of Kinmen, Taiwan │ Journal of Material Cycles and Waste Management │ 21 (1),44-56
36.	2018	Comprehensive Analysis of External Dependency in terms of Material Criticality by Employing Total Material Requirement: Sulfuric Acid Production in Japan as a case study │ Minerals │ 8 (3),114
37.	2018	Cost-Security Analysis Dedicated for The Off-grid Electricity System │ Renewable Energy │ (115),871-879
38.	2018	Crystal Structures and Electronic Band Structures for Hypothetic Lithium Boron Nitride Intercalation Compounds │ Journal of Alloy and Compounds │ 751,324-334
39.	2018	Data Envelopment Analysis for steel production with the use of Total Material Requirement │ Matériaux et Techniques │
40.	2018	Evaluating Power Reliability Dedicated for Sudden Disruptions: Its Application to Determine Capacity on the Basis of Energy Security │ Sustainability │ 10 (6),2059-
41.	2018	Recycling of End-of-Life Vehicles in Small Islands: The Case of Kinmen, Taiwan │ Sustainability │ 10 (4377),1-14
42.	2018	Vehicle Energy Efficiency Evaluation from Well-to Wheel Lifecycle Perspective │ Transportation Research Part D: Transport and Environment │ 65,355-367
43.	2018	持続可能な開発目標に向けた電子機器の使用年数の把握と傾向分析 │ 日本LCA学会誌 │ 14 (1),77-83
44.	2018	食料生産における関与物質総量の枠組の提案と評価～国産食材のTMR係数～ │ 日本LCA学会誌 │ 14 (4)
45.	2018	東南アジアにおける家電製品の素材リサイクルによるTMR削減ポテンシャル評価 │ 日本LCA学会誌 │ 14 (1)
46.	2017	Comparative analysis of average time of use of home appliances │ Procedia CIRP │ 61,657-662
47.	2017	Electrochemical lithium Intercalation behavior of pristine and milled hexagonal boron nitride │ Journal of Electroanalytical Chemistry │ 799,263-269
48.	2017	Intercalation of hexagonal boron nitride and graphite with lithium by sequential process of ball milling and heat treatment │ Journal of Alloys and Compounds │ 707,172-177
49.	2017	Investigating energy literacy and its structural model for lower secondary students in Japan │ International Journal of Environmental & Science Education (IJESE) │ 12 (5),1067-1095
50.	2017	Lifetime Analysis for Electronic Devices in Vietnam │ Procedia CIRP │ 61,152-154
51.	2017	Material flows from Electronic Waste: Understanding the shortages for Extended Producer Responsibility Implementation in Vietnam │ Procedia CIRP │ 61,651-656
52.	2017	New Photocatalyst LnOCl (Ln= Sm, Nd) and Novel Cocatalytic effect on BiOCl in Humid Environment │ ChemComm │ 53,8854-8857
53.	2017	Quantifying the total amounts of tramp elements associated with carbon steel production in Japan │ ISIJ International │ 57 (2),388-393
54.	2016	Consuming Childhoods: An Assessment of Child Labor’s Role in Indian Production and Global Consumption │ Journal of Industrial Ecology │ 20 (3),611-622
55.	2016	Critical minerals and energy – impacts and limitations of moving to unconventional resources │ Resources │ 5 (2),19-50
56.	2016	Electrical Stability of Al-doped ZnO Transparent Electrode prepared by Sol-Gel Method │ Applied Surface Science │ 377,355-360
57.	2016	Innovations in Steelmaking Technology and Hidden Phosphorus Flows │ Science of the Total Environment │ 542,1162-1168
58.	2016	Structures of Boron Nitride Intercalation Compound with Lithium synthesized by Mechanical Milling and Heat Treatment │ Journal of Alloys and Compounds │ 685,135-141
59.	2016	Total Material Requirement of Scrap Steel from End-of-Life Vehicles │ ISIJ International │ 56 (8),778-787
60.	2016	日本の中学生のエネルギー・リテラシー調査－知識、関心、行動の評価と日米比較－ │ エネルギー環境教育研究 │ 10 (2),15-28
61.	2015	Effect of substrate roughness and working pressure on photocatalyst of N-doped TiOx films prepared by reactive sputtering with air │ Applied Surface Science │ 324,339-348
62.	2015	Magnetic Field Effect on Heterogeneous Photocatalysis │ Catalysis Today │ 258 (P2),634-647
63.	2015	Sol-gel and RF sputtered AZO thin films: Analysis of Oxidation Kinetics in Harsh Environment │ Journal of Materials Science: Materials in Electronics (JMSE) │ 25,4883-4888
64.	2015	The Labour Footprint – An input-output approach to evaluate labour-related issues │ Economic Systems Research │ 27 (4),415-439
65.	2015	Weight at Source for Phosphorous Fertilizer Production │ Global Environmental Research │ 19 (11),97-104
66.	2015	蒸気輸送法による4CaO・P2O5および3CaO・P2O5の標準生成ギブズエネルギーの直接測定 │ 鉄と鋼 │ 101 (3),169-176
67.	2014	Adhesion Properties of milled CuO-CeO2/α-Al2O3 on Metallic Substrate for Automotive Catalytic Converter │ Particulate Science and Technology │ 32 (5),529-536
68.	2014	Assessment of metal recovery efficiency for waste printed circuit boards in Vietnam with MEMRECS and different end-of-life scenarios │ Journal of Solid Waste Technology and Management │ 40 (2),100-116
69.	2014	Damp heat stability of AZO transparent electrode and influence of thin metal film for enhancing the stability │ Journal of Materials Science: Materials in Electronics │ 25,3203-3208
70.	2014	Effect of process control agents (PCAs) on mechanochemical processes and contamination science │ Materials Science Forum │ 787-786,2665-2670
71.	2014	Energy Service Satisfaction in two Mexican Communities: a study on demographic, household, equipment and energy related predictors │ Energy policy │ 73,110-126
72.	2014	Improving sustainable recovery of metals from waste printed circuit boards by the primary copper smelter process │ Journal of Material Cycles and Waste Management │ 16 (2),298-305
73.	2014	Metallurgical Evaluation of Farmer’s Steelmaking in Finland │ ISIJ International │ 54 (5),1024-1029
74.	2014	Sustainable Materials Management on the basis of Relationship between Materials’ Properties and Human Needs │ Matériaux & Techniques │ 112 (5),506-510
75.	2014	使用済み自動車から得られる鉄スクラップの関与物質総量 │ 鉄と鋼 │ 100 (6),774-783
76.	2014	製鋼スラグからのリン資源回収の可能性 │ 環境技術 │ 43 (2),15-21
77.	2013	Direct Determination of Standard Gibbs Energies of the Formation of 4CaO•P2O5 and 3CaO•P2O5 by Transpiration Method │ ISIJ International │ 53 (10),1833-1840
78.	2013	MEMRECS—A Sustainable View for Metal Recycling from Waste Printed Circuit Boards │ Journal of Environmental Protection │ 4 (8),803-810
79.	2013	Model for Evaluating Metal Recovery Efficiency of Complex Scraps (MEMRECS) - A Promising Measure for Calculation of Metal Recyclability │ International Journal of Arts & Sciences │ 6 (1),73-87
80.	2013	Phase Stability of β-MoSi2-x Prepared by the Na Flux Method against Thermal, Oxidative and Mechanical Treatments │ Journal of Materials Science │ 48 (8),3121-3127
81.	2013	Quality Evaluation of Scrap Materials from Urban Buildings by means of Total Materials Requirement │ Journal of Industrial Ecology │ 17 (4),555-565
82.	2013	Road transport externalities in Mexico: Estimates and international comparisons │ Transport policy │ 30,63-76
83.	2013	Using Total Material Requirement to Evaluate the Potential for Recyclability of Phosphorous in Steelmaking Dephosphorization Slag │ J. Industrial Ecology │ 17 (5),722-730
84.	2012	Effect of Static Magnetic Field on Photocatalytic Degradation of Methylene Blue over ZnO and TiO2 Powders │ Applied Magnetic Resonance │ 42,17-28
85.	2012	Milling Induced Polymorphic Transformation in MoSi2 │ International Journal of Materials Research (formerly: Zeitschrift fuer Metallkunde) │ 103,1130-1136
86.	2012	Molecular Dynamics Study of the Milling-Induced Allotropic Transformation in Cobalt │ Philosophical Magazine │ 92,2117-2129
87.	2012	Technical Impact Indicators for Materials │ Revue de Métallurgie │ 109,305-321
88.	2011	Dynamic Equilibrium of MoSi2 Polymorphs during Mechanical Milling │ J. Alloys and Compounds │ 509 (1),S243-S246
89.	2011	Effects of Magnetic Field on Photodegradation of Methylene Blue over ZnO and TiO2 Powders using UV-LED as a Light Source │ J. Chem. Chem. Eng │ 5,729-737
90.	2011	Magnetic field effects on photodecomposition of methylene blue over ZnO particles │ RSC Advances, The Royal Society of Chemistry │ 1,1060-1063
91.	2011	Regional Development or Resource Preservation? A Perspective from Japanese Appliance Exports │ Ecological Economics │ 70,788-797
92.	2011	The environmental LCA of steel vs HDPE car fuel tanks with varied pollution control │ International Journal of Life Cycle Assessment │ 16,410-419
93.	2011	都市鉱山に含まれる素材の品位評価～リサイクルの関与物質総量（資源端重量）～ │ 廃棄物資源循環学会誌 │ 21 (1),11-18
94.	2010	4d-GISを用いた都市重量の変化と建設資材のリサイクル性に関する検討 │ 環境システム研究論文集 │ 38 (9),413-419
95.	2010	Hybrid LCA of a DfD technology: Active Disassembling Fasteners using Hydrogen Storing Materials implemented to Home Electric Appliances │ Environmental Science & Technology │ 44,4402-4408
96.	2010	Investigations on the Nitrogen Storage Property of LaNi5 powder │ J. Alloys and Compounds │ ,4375-4580
97.	2010	Photocatalysis and surface doping states of N-doped TiOx filmsg prepared by reactive sputtering with dry air │ Applied Catalysis B: Environmental │ 93 (3-4),217-226
98.	2010	Revisiting Carbon Based Metallic Compounds – Nanoscale Surface Science and Environmental Catalysis │ Materials Science Forum │ 638-642,858-863
99.	2010	Special Issue on Growth of Ecomaterials as a Key to Eco-Society IV (PREFACE) │ Materials Transactions │ 51 (5)
100.	2010	Traditional Steelmaking in Southwestern Ethiopia: A Metallurgical Analysis │ Nile Ethiopian Studies │ 14,1-18
101.	2010	ノートパソコンおよび携帯電話からの金属およびプラスチックリサイクルに必要なTMR(都市鉱石TMR)の算出と評価 │ 日本LCA学会誌 │ 6 (3),251-258
102.	2010	使用済み家電製品からの素材リサイクルに伴う関与物質総量（都市鉱石TMR）の推算と評価 │ 日本金属学会誌 │ 74 (12),811-819
103.	2010	都市鉱山からの元素・材料のリサイクル性に関する新規評価手法　―都市鉱石TMR― │ 日本金属学会誌 │ 74 (11),718-723
104.	2010	都市鉱山に含まれる元素・素材の「質」の関与物質総量の観点から見た評価 │ 日本LCA学会誌 │ 6 (2),111-118
105.	2009	Effect of oxygen and nitrogen concentration of nitrogen doped TiOx film as photocatalyst prepared by reactive sputtering │ Applied Catalysis A: General │ 371 (1--2),179-190
106.	2009	Evaluation of Total Materials Requirement for the Recycling of Elements and Materials (Urban Ore TMR) from End-of-Life Electric Home Appliances │ Materials Transactions │ 50 (9),2165-2172
107.	2009	Novel Evaluation Method of Elemental Recyclability from Urban Mine, ~Concept of Urban-ore TMR ~ │ Materials Transactions │ 50 (6),1536-1540
108.	2009	Phase stability under high-energy ball milling in the Ti-O system │ Journal of Physics: Conference Series │ 144,12-21
109.	2009	Preparation of N-doped TiOx films as photocatalyst using reactive sputtering with dry air │ Materials Transactions │ 50 (8),1805-1811
110.	2009	Use and disposal of large home electronic appliances in Vietnam │ Journal of Material Cycles and Waste Management │ 11,358-366
111.	2009	関与物質総量(TMR)を用いた使用済み製品に含まれる元素・素材のリサイクル性評価 │ 軽金属 │ 59 (11),620-628
112.	2009	使用済み携帯電話およびパーソナルコンピュータに含まれるレアメタル量の推計とそのインパクト評価 │ 日本金属学会誌 │ 73 (3),198-204
113.	2008	Evaluation of Recycling System for Electronic Appliances in Vietnam │ Development Engineering │ 14,1-13
114.	2008	Formation of supersaturated Fe-Li solid solution by mechanical alloying │ Reviews on Advanced Materials Science │ 18,284-288
115.	2008	メカニカルアロイングによるTiOの合成における吸着水の影響 │ 粉体および粉末冶金学会誌 │ 55 (1),26-32
116.	2008	家電製品の廃棄に伴うレアメタルの潜在的拡散量評価 │ 日本金属学会誌 │ 72 (8),587-592
117.	2008	都市鉱山としての家電製品ストック～ストック型社会構築に向けて～ │ 電気学会論文誌C │ 128 (1),6-10
118.	2007	Carbon Dioxide Reduction into Carbon by Mechanically-milled Wustite │ Journal of Materials Science │ 42,5196-9202
119.	2007	Decomposition of Carbon Dioxide into Carbon using Mechanically milled Magnetite │ Journal of Alloys and Compounds │ 434-435,803-805
120.	2007	Evaluation of the Dissipated Amounts of Rare Metals from WEEE in Japan │ Materials Transaction, JIM │ 48 (9),2353-2357
121.	2007	Mechanical Alloying of Lithium-base Systems │ Journal of Alloys and Compounds │ 434-435,542-545
122.	2007	Mechanical alloying, nitrogen storage and magnetization of Ca-Co powder │ Materials Science and Engineering A │ 449-451,1123-1126
123.	2007	Mechanical milling of Fe-Li and Cu-Li systems and their nitrogen absorption properties │ Materials Science and Engineering A │ 449-451,1067-1070
124.	2007	Mechanical Milling of Lithium with Metal Oxide and its Reactivity with Gases │ Materials Science Forum │ 534-536,197-200
125.	2007	エチオピア西南部における製鉄および鍛冶技術の冶金学的検証 │ 日本金属学会誌 │ 48 (9),763-771
126.	2007	エネルギー・環境教育の波及効果の検討 │ エネルギー環境教育 │ 2,61-67
127.	2007	メカニカルミリングにより結晶構造変化した酸化チタンを用いたNO分解 │ 粉体および粉末冶金学会誌 │ 54 (10),686-693
128.	2006	エチオピア西南部の製鉄技術と鉄器使用 │ 物質文化 │ 81 (6),1-20
129.	2006	新製品への代替を考慮した家電製品の廃棄台数予測 │ 日本金属学会誌 │ 70 (8),611-614
130.	2005/10	On the origin and stability of the metastabe phase in rapidly solidified Sn-Bi alloy particles embedded in Al matrix │ Acta Materilia │ 53 (17),593-4603
131.	2005	Mechanical alloying and nitrogen storage properties of Ca-Fe powder │ Journal of Alloys and Compounds │ 395,159-165
132.	2005	Ni-Mo/TiO2複合めっきとその光触媒特性 │ 表面技術 │ 56 (11),692-697
133.	2005	仮想摩擦係数を用いた旅客輸送における統合的エネルギー効率の評価 │ 日本エネルギー学会 │ 84 (2),119-125
134.	2005	小型たたら炉の炉サイズに関する考察 │ 鉄と鋼 │ 91 (1),001-007
135.	2003/05	Deviation from Wiedemann-Franz law for Thermal Conductivity of liquid Tin and Lead at Elevated Temperature │ International Journal of Thermophysics │ 24 (3),713-730
136.	2003	自己粉砕ねじと家電リサイクルへの応用 │ エネルギー資源学会誌 │ 24 (3),184-187
137.	2002	Thermal conductivities of Silicon and Germanium in Solid and Liquid States Measured by Non-Stationary Hot Wire Method with Silica Coated Probe │ Journal of Crystal Growth │ 234,121-131
138.	2002	自動車の燃料消費率の推移とその要因 │ 粉体および粉末冶金 │ 49 (5),419
139.	1999/08	Non-stationary Hot Wire Method with Silica-Coated Probe for Measuring Thermal Conductivities of Molten Metals │ Metallurgical and Materials Transactions A │ 30,1971-1979