Researcher Database

KAWASAKI Yuma

Department / Course College of Science and Engineering Department of Civil and Environmental Engineering

Title / Position Associate Professor

Papers
1.	2021/04	AE source location of debonding steel-rod inserted and adhered inside rubber │ Journal of Construction and Building Materials │ 279,pp.1-10 (Co-authored)
2.	2020/10	EVALUATION OF INITIATION STAGE OF REBAR CORROSION IN RC USING ACOUSTIC EMISSION │ Proceedings of ConMat'20 │ ,pp.1913-1923 (Co-authored)
3.	2020/09	SEISMIC RUBBER BEARING DAMAGE DETECTION USING ELASTIC WAVE PROPAGATION METHOD │ Proceedings of 17WCEE │ 2d-0024 (Co-authored)
4.	2020/08	POROSITY AT EACH DEPTH IN POROUS CONCRETE DUE TO PASTE DRAW-DOWN │ Proceedings of ConMat'20 │ ,pp.533-543 (Co-authored)
5.	2020/07	Failure-mode analysis of macro-synthetic and hybrid fibre-reinforced concrete beams with GFRP bars using acoustic emission technique │ Journal of Construction and Building Materials │ 249 (20),pp.1-12 (Co-authored)
6.	2020	NUMERICAL SIMULATION FOR DETECTING INTERNAL VOID OF SEISMIC RUBBER BEARING │ Journal of Japan Association for Earthquake Engineering │ 20 (5),pp.24-35 (Co-authored)
7.	2018/02	Fracture studies on synthetic fiber reinforced cellular concrete using acoustic emission technique │ Journal of Construction and Building Materials │ 169,pp.100-112 (Co-authored)
8.	2017/10	Accuracy of Porosity Estimation of Porous Concrete Using Radio-Isotope Method │ CONCRETE2017 Advanced in Concrete Materials and Structures │ (Co-authored)
9.	2017/09	Acoustic Emission Behavior of Synthetic Fiber Reinforced Concrete under Flexure │ 71st RILEM Annual Week & ICACMS 2017 │ ,pp.577-586 (Co-authored)
10.	2017/03	ACOUSTIC EMISSION TECHNIQUE FOR EVALUATION OF DAMAGE TO LAMINATED RUBBER BEARING │ Journal of JSCE │ 5,pp.2-9 (Co-authored)
11.	2017/03	Experimental and numerical analyses on tsunami forces for skewed bridge │ 63 (A) (Co-authored)
12.	2017/01	DAMAGE EVALUATION OF ANTI-SEISMIC RUBBER BEARING USING ACOUSTIC EMISSION │ Proc. of 16th World Conference on Earthquake Engineering │ (710) (Co-authored)
13.	2015/10	BASIC STUDY ON EVALUATION FOR EXPLOSIVE SPALLING PROCESS IN CONCRETE BY ACOUSTIC EMISSION METHODS │ Proc. of 4th International Workshop on Concrete Spalling due to Fire Exposure │ ,pp.188-193 (Co-authored)
14.	2015/06	On-site Damage Evaluation of Bridge Rubber Bearing by using Acoustic Emission │ Proc. of 16th European Bridge Conference(CD-ROM) │ (Co-authored)
15.	2015/02	Health Monitoring of Rubber Bearing by using Acoustic Emission Test │ Proc. of IABSE Workshop │ 103,pp.228-233 (Co-authored)
16.	2014/11	Monitoring of Fracture Mechanisms due to Rebar Corrosion in RC under Bending Test by Acoustic Emission │ Proc. of PROGRESS IN ACOUSTIC EMISSION XVII │ ,pp.19-24 (Co-authored)
17.	2014/09	Evaluation for RC specimen damaged from rebar corrosion by acoustic emission technique │ Journal of Construction and Building Materials │ 67,pp.157-164 (Co-authored)
18.	2014/09	Fracture behavior of RC members subjected to bending shear and torsion using acoustic emission method │ Journal of Construction and Building Materials │ 67,pp.165-169 (Co-authored)
19.	2014/07	PiBEM ANALYSIS WITH ACOUSTIC EMISSION FOR REBER CORROSION TOWARD PRACTICAL ON-SITE MEASUREMENT │ Proc. of Structural Faults & Repair-2014 (CD-ROM) │ (Co-authored)
20.	2013/11	Corrosion Mechanisms in Reinforced Concrete by Acoustic Emission │ Journal of Construction and Building MATERIALS │ 48,pp.1240-1247 (Co-authored)
21.	2013/09	Development of a Water Purification Effect Using Porous Concrete Sphere │ Proc. of The 8th International Symposium on Cement & Concrete │ (Co-authored)
22.	2013/08	On-Site Measurement of Corrosion of Steel Bars in Concrete by Acoustic Emission │ Proc. of 3rd International Conference on Sustainable Construction Materials and Technologies (SCMT3) │ ,pp.e176 (Co-authored)
23.	2013/03	Toward Hybrid-NDE for Rebar Corrosion in Reinforced Concrete with Acoustic Emission │ Proc. of 8th Fracture Mechanics of Concrete and Concrete Structures (CD-ROM) │ (Co-authored)
24.	2012/11	Evaluation of Drying Shrinkage Process in Concrete by AE and RATE Process │ Proc. of PROGRESS IN ACOUSTIC EMISSION XVI │ ,pp.7-12 (Co-authored)
25.	2012/07	FRACTURE MECHANISMS OF CORROSION-INDUCED CRACKS IN REINFORCED CONCRETE BY BEM AND AE-SIGMA │ Proc. of Structural Faults & Repair-2012 (CD-ROM) │ (Co-authored)
26.	2012/04	Kinematics of Corrosion Damage Monitored by Acoustic Emission Techniques and Based on a Phenomenological Model │ Journal of Advanced Concrete Technology │ 10,pp.160-169 (Co-authored)
27.	2011/12	Corrosion Process and Mechanisms of Corrosion-Induced Cracks in Reinforced Concrete identified by AE Analysis │ Journal of Strain │ 47 (2),pp.179-186 (Co-authored)
28.	2011/09	Acoustic Emission Behavior during Corrosion Process in Reinforced Concrete in Proof of EPMA │ Emerging Technologies in Non-Destructive Testing │ ,pp.149-154 (Co-authored)
29.	2011/09	AE Monitoring of Shrinkage Process in Concrete │ Emerging Technologies in Non-Destructive Testing │ ,pp.143-148 (Co-authored)
30.	2011/09	Corrosion Damage in Reinforced Concrete identified by AE │ CONCRETE RESEARCH LETTERS │ 2 (3),pp.262-266 (Co-authored)
31.	2010/12	AE monitoring of corrosion process in cyclic wet-dry test │ Journal of Construction and Building MATERIALS │ 24 (12),pp.2353-2357 (Co-authored)
32.	2010/11	Monitoring of Corrosion Process in Reinforced Concrete due to Salt Attack by AE │ PROGRESS IN ACOUSTIC EMISSION XV │ ,pp.241-246 (Co-authored)
33.	2010/06	AE MONITORING OF CORROSION PROCESS IN REINFORCED CONCRETE UNDER CYCLIC WET & DRY CONDITION │ Proc. of Structural Faults & Repair-2010 │ (Co-authored)
34.	2010/05	Monitoring Corrosion-Induced Cracks in Concrete by Acoustic Emission │ Proc. of 7th International Conference on Fracture Mechanics of Concrete and Concrete Structures │ ,pp.1097-1104 (Co-authored)
35.	2010/01	AE-SiGMA ANALYSIS IN BRAZILIAN TEST AND ACCELERATED CORROSION TEST OF CORROSION │ Journal of Acoustic Emission │ 28,pp.204-214 (Co-authored)